outdoors 14
Views : 595
2022-10-18 14:10:58
outdoors 14
Outdoor survival is inseparable from the need for fire and water. How can we properly and conveniently obtain and use fire and water in nature under outdoor conditions is a skill we must master for outdoor survival，sports fitness .
fire
To find flammable kindling materials: such as withered grass, dried leaves, birch bark, pine needles, pine resin, twigs, paper, cotton, etc.
The second is to pick up and lift dry firewood: dry and incorruptible trunks or branches should be selected. Try to choose hardwood such as pine, oak, oak, birch, locust, mountain cherry and mountain apricot, which will burn for a long time, with large fire and more charcoal. Do not pick up the firewood close to the ground. The firewood close to the ground has high humidity, is not easy to burn, and has been smoked.
It is to clear up a flat area away from dry grass and firewood. Place the igniter in the middle, gently put fine pine branches and dry firewood on it, then erect larger and longer firewood, and then ignite the igniter. Setting of fire
outdoor activities
According to local conditions, it can be designed into cone shape, star shape, "parallel" shape, side by side shape, roof shape, pasture shape, etc. You can also use stones to support dry firewood or lean the dry firewood against the rock wall under the rock wall, and place a igniter below it to ignite it. Generally, a pit with a diameter of about 1m and a depth of about 30cm shall be dug at the shelter.
If the ground is hard and cannot be dug, you can also find some stones to make a circle. The size of the circle depends on the size of the fire. Then place the igniter in the middle of the circle, put some dry firewood on it, and light the igniter to ignite the dry firewood to form a campfire. If the dry firewood has not been ignited when the igniter is about to burn up, the igniter shall be added from the gap of the dry firewood until the dry firewood is burned, instead of re erecting the firewood for ignition.
